***Limit 1 per person***

Want to try our Forever Shutters risk free? Order a sample shutter from us and we'll ship it to you for free. Hold on to it as long as you wish. Upon returning/shipping the sample back to us we'll credit you back the original cost of the sample shutter. Or you can call one of our sales representatives if you have more questions about our products. Dimensions are 30"H x 12"W

Our solid PVC Exterior Forever Shutters are made from a revolutionary material called Versatex which is 100% rot proof and designed to look, feel, and paint like wood. Our state-of-the-art shutter process involves using solid architectural grade PVC with stainless steel reinforcement to give you a hingeable no rot exterior shutter with the look and feel of wood without the cracking, warping, or cheap look associated with vinyl. Also, unlike wood composites which can consist of part wood, this premium material is 100% rot proof and backed with a LIFETIME guarantee!

Available in heights up to 95" high and widths 10"-22" wide. Arc tops are also available. Click for a custom quote or call us toll free at 888-505-7715. There are two ways to install our PVC exterior shutters: direct set or on hinges. Direct set involves directly screwing the shutters to the house, whereas hinges allow the use of metal hardware to add a more upscale look to your shutters. The recommended number of New York style hinges for PVC shutters are as follows:

31" - 47": 2 hinges (4 hinges/pair)
48" - 95": 3 hinges (6 hinges/pair)
Specs: 12"Wide x 30"Tall, 1" thick

All PVC outdoor shutters are available in 20 different custom factory colors or come in white ready to be painted. No need to prime. Not all monitors will show the colors the same. You can use the color names and numbers to visit a Sherwin-Williams paint store to see what they look like in person. Customers can also paint themselves with matching paint from their homes or have their handyman, painter, contractor, or installer paint for them. All shutters are custom made to order and thus non-returnable. Please allow 1-2 weeks to receive unpainted shutters and 3-4 weeks to receive painted shutters.

View a Different Style Shutter

All PVC Raised Panel Forever Shutters TM	All PVC Board and Batten Forever Shutters TM	All PVC Louver Forever Shutters TM
Unique PVC Forever Shutters TM	Cutout Design PVC Forever Shutters TM	Premium Cedar Shutters

Related Products:

Shutter Hardware

PVC Window Boxes

PVC Planters

• Dimensions are 30"H x 12"W. Matte finish gives look of wood instead of a glossy or plastic
• look associated with vinyl and other plastic materials.

Measuring Windows for Exterior Shutters First

The First step before you even measure your windows is to decide whether or not you want standard generic size shutters or custom shutters for your window. The difference is as follows (read and see diagram):

1. Generic Sizing: Simply going with the same width shutter on every window, typically 15"
2. Custom: Getting shutters to match the size of the window or in instances where the window is too large you will simply get proportionally larger shutters for larger windows (See diagram below)



Nowadays, windows are made so custom that many times they can be 6', 8', 10 foot long and even longer. This just was not the case in the old days. For this reason it is common practice to simply get proportionally larger shutters for instances of windows exceeding 4 feet wide. It's usually not practical to put 5 foot wide shutters on either side of a 10 foot window.

Our recommendation for custom sizing is to put 18" shutters on windows sized 3-4 foot wide and 22" shutters on windows larger than that. For windows smaller than 3 feet we generally recommend half the width of the window. This will give the look of the shutters in the diagram on the top right. For non-custom generic measuring you will only need to measure the height of the window to get the sizes you need and you will pick a width that you feel best matches the windows on your house, most typically 15" wide.

To measure the width of the window, simply take a tape measure from one end to the other. Do not include any trim around the window in your measurement. You want to imagine that your shutters could close and cover the window up. The parts of the window that you are logically covering up are what you are measuring. Once you've measured your shutters and ordered them, then it is time to paint them and install them or you can order any of our exterior shutters prepainted in one of our 20 factory colors.

Installation Directions for PVC Exterior Shutters

The following are directions if you are installing our exterior shutters on hinges. Please note that shutters are designed to remain open at all times held down by the shutter dog and installed as listed below.

Exterior Shutters are installed on 2-3 hinges which sit atop "pintels" screwed into the window frame. A shutter pintel is the male part of the hinge that connects the hinge to the house, offsets the shutter from the trim, and provides a pivot point for the hinges to rotate. Pintels come in three sizes: siding, brick, and rock. Siding generally sticks out 1 1/4" from the home. Brick sticks out 2 1/4" from the home and rock sticks out 4 1/16 inches from the home. The wrong pintel will not allow the shutters to offset the right distance and may keep the shutters from lying fush or near flush on the house. Two hinges is enough to suffice for shutters up to 47" height. However, for extra tall shutters up to 95" height you need to use 3 hinges/shutter for additional support.

Installation Steps: The first step is to attach the shutter hinges to the back of the shutter as shown to the top right above. Keep in mind that each shutter has a mirror partner and hardware will be attached in a mirror fashion for the partner. It is recommended to flush the top and bottom hinges with the top and bottom of the shutter so that the recommended pintel alignment later on is correct. The next step is to attach the shutter to the home. To do this you want to secure the first pintel into the window first. The 1.5" offset from the sill to the bottom of the first pintel is recommended (see picture on left). Have the second pintel and a drill on hand so that you're ready for the next step. Slide the shutter into the first pintel to see where the proper location of the second pintel will now fall. While holding the shutter over the first pintel, place the second pintel through the hinge and screw into the windows reveal. Finally, slide any remaining pintels into place for the remaining hinges and screw into place as well.

An S-Shaped piece of hardware called a shutter stay or shutter dog is used to hold the shutter open. It is installed in the bottom opposite corner directly to the home as well. Use lag anchors to hold them for brick or rock. For siding, simply pre-drill a smaller 1/4" hole and tighten the shutter dog in place.

The final step is installing a hidden metal L-bracket in the top opposite corner of the shutter to secure it to the home and keep the shutter open. Screw the metal bracket into the siding first with a 2" screw, such that it just clears the top of the shutter. Now drive a 2" screw down into the top of the shutter. This will secure the shutter down in the opposite corner